ABSTRACT
@#Objective To investigate the clinical effect of 3D computed tomography bronchial bronchography and angiography (3D-CTBA) and guidance of thoracoscopic anatomic pulmonary segmentectomy by Mimics software system. Methods A retrospective analysis was performed on patients who underwent thoracoscopic segmentectomy in the Department of Thoracic Surgery of Affiliated People's Hospital of Jiangsu University from June 2020 to December 2022. The patients who underwent preoperative 3D-CTBA using Materiaise's interactive medical image control system (Mimics) were selected as an observation group, and the patients who did not receive 3D-CTBA were selected as a control group. The relevant clinical indicators were compared between the two groups. Results A total of 59 patients were included, including 29 males and 30 females, aged 25-79 years. There were 37 patients in the observation group, and 22 patients in the control group. The operation time (163.0±48.7 min vs. 188.8±43.0 min, P=0.044), intraoperative blood loss [10.0 (10.0, 20.0) mL vs. 20.0 (20.0, 35.0) mL, P<0.001], and preoperative puncture localization rate (5.4% vs. 31.8%, P=0.019) in the observation group were better than those in the control group. There was no statistically significant difference in the thoracic tube placement time, thoracic fluid drainage volume, number of intraoperative closure nail bin, postoperative hospital stay, or postoperative air leakage incidence (P>0.05) between the two groups. Conclusion For patients who need to undergo anatomical pulmonary segmentectomy, using Mimics software to produce 3D-CTBA before surgery can help accurately identify pulmonary arteriovenous anatomy, reduce surgical time and intraoperative blood loss, help to determine the location of nodules and reduce invasive localization before surgery, and alleviate patients' pain, which is worthy of clinical promotion.
ABSTRACT
The finite element method(FEM)is a widely employed mathematical technique in mechanical research that divides an object into discrete and interacting finite elements. Medically, finite element analysis(FEA)enables the simulation of biomechanical experiments that are challenging to conduct. Orbital surgery poses significant challenges to ophthalmologists due to its inherent difficulty and steep learning curve. FEM enables the simulation and analysis of the mechanical properties of orbital tissue, offering a novel approach for diagnosing and treating orbital-related diseases. With technological advancements, FEM has significantly matured in the diagnosis and treatment of orbital diseases, becoming a popular area of research in orbital biomechanics. This paper reviewed the latest advancements in orbital FEM, encompassing the development of orbital FEA models, simulation of orbital structure, and its application in orbital-related diseases. Additionally, the limitations of FEM and future research directions are also discussed. As a digital tool for auxiliary diagnosis and treatment, orbital FEA will progressively unlock its potential for diagnosing and treating orbital diseases alongside technological advancements.
ABSTRACT
BACKGROUND@#Since the popularization of computed tomography (CT) technology, the detection rate of pulmonary ground glass nodules (GGNs) with imaging follow-up as the main management method has increased significantly. The purpose of this study is to quantitatively analyze the changes of pulmonary GGNs during the follow-up process with three-dimensional reconstruction technology, explore the natural progression of pulmonary GGNs, and provide effective basis for clinical guidance for patients to conduct reasonable management of nodules.@*METHODS@#A total of 115 cases of pulmonary GGNs with regular follow-up in the Combined Outpatient Department of Zhoushan Hospital from March 2015 to November 2022 were enrolled. Quantitative imaging features of nodules were extracted by semi-automatic segmentation of 3D Slicer software to evaluate the growth of nodules and clinical intervention during follow-up.@*RESULTS@#The average baseline age of the patients was (56.9±10.1) yr. The mean follow-up time was (48.8±18.9) months. The two-dimensional diameter of baseline CT scan was (7.9±2.9) mm, and the maximum three-dimensional diameter was (10.1±3.4) mm. The two-dimensional diameter of the last CT scan was (9.9±4.7) mm, and the maximum three-dimensional diameter was (11.4±5.1) mm. A total of 27 cases (23.5%) showed an increase during follow-up, with a median volume doubling time of 822 days and a median mass doubling time of 1,007 days. 32 cases were surgically resected, including 6 cases of invasive adenocarcinoma (IAC), 16 cases of minimally invasive adenocarcinoma (MIA), 8 cases of adenocarcinoma in situ (AIS) and 2 cases of atypical adenomatous hyperplasia (AAH). Five nodules underwent surgical intervention due to the progression of two-dimensional diameter, which was pathologically confirmed as pre-invasive lesions, but their three-dimensional maximum diameter showed no significant change. Nodular morphology, lobulated sign, spiculated sign and vacuole signs all promoted the growth of nodules in univariate analysis. There were significant differences in age, baseline diameter, mean CT value, median CT value, 10% and 90% percentile CT number between the growth group and the stable group (P<0.05). Multivariate Logistic regression analysis showed that age and average CT value were risk factors for nodule growth (P<0.05). Receiver-operating characteristic (ROC) curve analysis results indicated that the age ≥63 years old, the baseline three-dimensional maximum diameter ≥9.2 mm, and the average CT value ≥-507.8 HU were more likely to accelerate the growth of GGNs. The maximum three-dimensional diameter ≥14.4 mm and the average CT value ≥-495.7 HU may be a higher malignant probability.@*CONCLUSIONS@#GGNs show an inert growth process, and the use of three-dimensional measurements during follow-up is of greater significance. For persistent glass grinding nodules ≥63 years old, the baseline three-dimensional maximum diameter ≥9.2 mm, and the average CT value ≥-507.8 HU are more likely to increase. However, most nodules still have good prognosis after progression, and long-term follow-up is safe.
Subject(s)
Humans , Middle Aged , Lung Neoplasms/pathology , Imaging, Three-Dimensional , Neoplasm Invasiveness , Retrospective Studies , Multiple Pulmonary Nodules/pathology , Adenocarcinoma/pathologyABSTRACT
OBJECTIVES@#To investigate the reliability and accuracy of deep learning technology in automatic sex estimation using the 3D reconstructed images of the computed tomography (CT) from the Chinese Han population.@*METHODS@#The pelvic CT images of 700 individuals (350 males and 350 females) of the Chinese Han population aged 20 to 85 years were collected and reconstructed into 3D virtual skeletal models. The feature region images of the medial aspect of the ischiopubic ramus (MIPR) were intercepted. The Inception v4 was adopted as the image recognition model, and two methods of initial learning and transfer learning were used for training. Eighty percent of the individuals' images were randomly selected as the training and validation dataset, and the remaining were used as the test dataset. The left and right sides of the MIPR images were trained separately and combinedly. Subsequently, the models' performance was evaluated by overall accuracy, female accuracy, male accuracy, etc.@*RESULTS@#When both sides of the MIPR images were trained separately with initial learning, the overall accuracy of the right model was 95.7%, the female accuracy and male accuracy were both 95.7%; the overall accuracy of the left model was 92.1%, the female accuracy was 88.6% and the male accuracy was 95.7%. When the left and right MIPR images were combined to train with initial learning, the overall accuracy of the model was 94.6%, the female accuracy was 92.1% and the male accuracy was 97.1%. When the left and right MIPR images were combined to train with transfer learning, the model achieved an overall accuracy of 95.7%, and the female and male accuracies were both 95.7%.@*CONCLUSIONS@#The use of deep learning model of Inception v4 and transfer learning algorithm to construct a sex estimation model for pelvic MIPR images of Chinese Han population has high accuracy and well generalizability in human remains, which can effectively estimate the sex in adults.
Subject(s)
Adult , Female , Humans , Male , Young Adult , Middle Aged , Aged , Aged, 80 and over , Deep Learning , Imaging, Three-Dimensional , Pelvis , Reproducibility of Results , Tomography, X-Ray ComputedABSTRACT
OBJECTIVE@#To investigate the feasibility of MRI three-dimensional (3D) reconstruction model in quantifying glenoid bone defect by comparing with CT 3D reconstruction model measurement.@*METHODS@#Forty patients with shoulder anterior dislocation who met the selection criteria between December 2021 and December 2022 were admitted as study participants. There were 34 males and 6 females with an average age of 24.8 years (range, 19-32 years). The injury caused by sports injury in 29 cases and collision injury in 6 cases, and 5 cases had no obvious inducement. The time from injury to admission ranged from 4 to 72 months (mean, 28.5 months). CT and MRI were performed on the patients' shoulder joints, and a semi-automatic segmentation of the images was done with 3D slicer software to construct a glenoid model. The length of the glenoid bone defect was measured on the models by 2 physicians. The intra-group correlation coefficient ( ICC) was used to evaluate the consistency between the 2 physicians, and Bland-Altman plots were constructed to evaluate the consistency between the 2 methods.@*RESULTS@#The length of the glenoid bone defects measured on MRI 3D reconstruction model was (3.83±1.36) mm/4.00 (0.58, 6.13) mm for physician 1 and (3.91±1.20) mm/3.86 (1.39, 5.96) mm for physician 2. The length of the glenoid bone defects measured on CT 3D reconstruction model was (3.81±1.38) mm/3.80 (0.60, 6.02) mm for physician 1 and (3.99±1.19) mm/4.00 (1.68, 6.38) mm for physician 2. ICC and Bland-Altman plot analysis showed good consistency. The ICC between the 2 physicians based on MRI and CT 3D reconstruction model measurements were 0.73 [95% CI (0.54, 0.85)] and 0.80 [95% CI (0.65, 0.89)], respectively. The 95% CI of the difference between the two measurements of physicians 1 and 2 were (-0.46, 0.49) and (-0.68, 0.53), respectively.@*CONCLUSION@#The measurement of glenoid bone defect based on MRI 3D reconstruction model is consistent with that based on CT 3D reconstruction model. MRI can be used instead of CT to measure glenoid bone defects in clinic, and the soft tissue of shoulder joint can be observed comprehensively while reducing radiation.
Subject(s)
Male , Female , Humans , Young Adult , Adult , Imaging, Three-Dimensional/methods , Tomography, X-Ray Computed/methods , Joint Instability , Shoulder Joint/diagnostic imaging , Shoulder Dislocation , Magnetic Resonance Imaging/methodsABSTRACT
@#Objective To assess the clinical value of preoperative localization coupled with computed tomography (CT) three-dimensional reconstruction in pulmonary nodule-centered uniportal thoracoscopic combined subsegmental/segmental resection. Methods The clinical data of 30 patients of combined subsegmental/segmental resection in our hospital from December 2019 to October 2021 were retrospectively collected. There were 19 males and 11 females with the mean age of 56.4 (32.0-71.0) years. The pulmonary nodules were located by CT-guided injection of glue before operation. The three-dimensional reconstruction image and operation planning were carried out by Mimics 21.0 software. Results The operations were all successfully performed, and there was no conversion to open thoracotomy or lobectomy. The mean tumor diameter was 11.6±3.5 mm, the mean distance between the nodule and the visceral pleura was 13.6±5.6 mm, the mean width of the actual cutting edge was 25.0±6.5 mm, the mean operation time was 110.2±23.8 min, the mean number of lymph node dissection stations was 6.5±2.4, the mean amount of intraoperative bleeding was 50.8±20.3 mL, the mean retention time of thoracic catheter was 3.2±1.1 d, and the mean postoperative hospital stay was 4.5± 1.7 d. There was 1 patient of subcutaneous emphysema, 1 patient of atrial fibrillation and 1 patient of blood in sputum. Conclusion Preoperative CT-guided injection of medical glue combined with CT three-dimensional reconstruction of pulmonary bronchus and blood vessels is safe and feasible in pulmonary nodule-centered uniportal thoracoscopic combined subsegmental/segmental resection, which ensures the surgical margin and reserves lung tissues.
ABSTRACT
Objective:To investigate the alterations in soft tissue morphology and thickness in the mid-face region of patients with cleft lip and palate (UCLP) secondary to maxillofacial deformity following Le Fort I osteotomy.Methods:A total of 22 patients (16 males and 6 females aged from 17 to 28 years with an average of 20 years) diagnosed with cleft lip and palate secondary to maxillofacial deformity were collected from the Wuhan University Hospital of Stomatology from July 2012 to August 2020. All patients underwent Le Fort I osteotomy. CBCT scans were obtained at T0 (3 days before surgery), T1 (7 days after surgery), and T2 (1 year after surgery). The Dolphin11.95 software and 3D Slicer software were utilized to measure and analyze the soft tissue near the mid-face osteotomy line. Differences in soft tissue thickness before and after surgery were compared.Results:Before and after the operation, the soft tissue thickness at P3, P5, P6, and P8 on the affected side was thicker than that on the healthy side, and the difference was statistically significant, with a P-value of <0.05. At P5, P6, P7, P8, and P9 below the osteotomy line at T2-T0, the degree of postoperative thinning on the affected side was more apparent than that on the healthy side, and there was statistical significance at P6 ( P<0.05). The postoperative soft tissue asymmetry in the Ck region was improved compared with the preoperative one. The preoperative average protruding of the affected side was 0.63 compared with the healthy side, and the postoperative value was 0.17. The preoperative and postoperative Mann-Whitney U tests showed significantly statistical difference. Conclusions:After Le Fort I osteotomy, the facial asymmetry of patients with unilateral cleft lip and palate secondary to maxillofacial deformity is improved. However, there is still a difference in the soft tissue thickness between the healthy side and the affected side, and the change in soft tissue thickness on the affected side is more significant than that on the healthy side.
ABSTRACT
Objective:To investigate the clinical effect of a 3D reconstruction assisted preoperative optimal design of anterolateral abdomen cross-region free perforator flaps for repair of soft tissue defects of limbs.Methods:Twenty patients who were treated for soft tissue defects of hand, forearm, foot and ankle in the Department of Hand Surgery, the Sixth Hospital of Ningbo from October 2017 to January 2020 were included in this study. Among the patients,17 had soft tissue defects in hand and forearm and 3 with composite tissue defects including ankle and soft tissue defect of foot. The sizes of soft tissue defects in limbs ranged from 6 cm × 8 cm - 36 cm × 18 cm. Twenty free cross-area perforator flaps were optimal designed with CTA and 3D assisted reconstruction before surgery. Following combinations of flaps were designed: (1) Free perforator flap with inferior abdominal artery and superior abdominal artery; (2) Free perforator flap with superficial iliac circumflex artery and deep iliac circumflex artery; (3) Free perforator flap with superficial iliac circumflex artery and inferior abdominal wall perforator artery; (4) Free perforator flap with perforators of superficial iliac circumflex artery plus superficial abdominal artery; (5) Free perforator flap with perforating artery of lower abdominal wall and superficial artery of abdominal wall. The overall nutritional area of a combined flap were 272.3 cm 2± 12.5 cm 2, 107.4 cm 2± 9.3 cm 2, 193.6 cm 2± 24.2 cm 2, 155.2 cm 2± 20.1 cm 2 and 203.7 cm 2± 16.3 cm 2, respectively. All the donor sites were sutured directly in one stage. The appearance, texture, blood supply, colour, joint movement of affected limbs, recovery and function of donor sites were observed through postoperative follow-up visits at the outpatient clinic. Results:Among the 20 anterolateral transventral perforator flaps, 18 flaps survived successfully; One had partial necrosis after surgery, and healed after dressing change. Subcutaneous haematoma occurred in 1 flap, and survived after drainage. In this study, there was no postoperative infection of flap. A total of 19 flaps healed in one stage, except 1 that had a delayed healing and the flap wound was closed after dressing change for 1 week. According to Disability of Arm, Shouder and Hand (DASH) questionnaire evaluation, which is widely used in the world to evaluate the therapeutic effect after limb injury, combined with the 6-12 months of follow-up, the functional recovery of 17 patients with upper limbs iniury was 7 in excellent, 9 in good and 1 in poor. The overall excellent and good rate achieved 94.1%. All the 3 patients with foot injury recovered well, and the walking and jumping were not significantly affected. The results were all excellent according to the Maryland Foot Function Scoring. Sensation of flaps was evaluated according to the British Sensory Function Evaluation, it showed: 3 in S 2, 15 in S 3 and 2 in S 3+. All 20 flaps had good blood supply, in soft texture, good colour, feeling, thickness and movement. The donor sites all healed well. Conclusion:Combined with an optimal preoperative design, the perforator flap of anterior lateral wall cross-region can obtain a satisfactory clinical efficacy in repair of large area soft tissue defects. It is a feasible treatment method.
ABSTRACT
Objective:To elucidate the spatial distribution patterns of the right hepatic vein by analyzing the image information obtained after CT three-dimension reconstruction of liver to provide guidance in surgical planning of anatomical hepatectomy.Methods:A retrospective analysis was performed on the clinical data of 77 subjects who underwent CT examination of the liver at the Second Affiliated Hospital of Harbin Medical University from September 2018 to October 2021. There were 42 males and 35 females, aged (50.2±12.8) years old. CT DICOM data of the patients were collected, and the two-dimensional image data were reconstructed into a three-dimensional model by using the 3D reconstruction software. The characteristics and typing were studied by analyzing the number of branches of the right hepatic vein and the spatial location of the main trunk.Results:Of 77 subjects, 645 branches of the right hepatic vein were observed in the liver CT 3D reconstruction model, including 268 (41.6%) right-sided branches, 240 (37.2%) dorsal branches, 70 (10.9%) left-sided branches, and 67 (10.3%) ventral branches. Each right hepatic vein possessed 3 (3, 4) right-sided branches, 3 (3, 4) dorsal branches, 1 (0, 1) left-sided branch, and 1 (0, 1) ventral branch. The numbers of branches in the four directions were significantly different ( H=175.89, P<0.001). Comparison showed that the number of right-sided branches was significantly more than that of the left-sided (χ 2=136.86) and ventral (χ 2=140.07), respectively. The number of dorsal branches was more than that of left-sided (χ 2=-123.36) and ventral (χ 2=126.57) branches, respectively. The differences were significant ( P<0.001). There were no significant differences between the number of ventral and left-sided branches, and between the dorsal and right-sided branches (all P>0.05). Conclusion:The right hepatic vein had fewer ventral and left-sided branches. It is relatively safe to dissect the right hepatic vein from the ventral or the left side during surgery. For resection of the central liver segments or segment VIII of the liver, it is reasonable to transect the liver along the left border of the right hepatic vein.
ABSTRACT
Objective:To explore the application effect of case-based learning (CBL) combined with three-dimensional (3D) imaging technology in thoracic surgery probationary teaching.Methods:Ninety thoracic surgery interns in the Affiliated Hospital of Yangzhou University, China in 2019 were selected and divided into the conventional theoretical teaching group (group A), CBL group (group B), and CBL combined with 3D imaging technology group (group C) according to the random number table method. Group A was taught with conventional theory; group B was taught by CBL; in group C, 3D imaging software was used to reconstruct computed tomography data based on CBL. The theoretical scores of the three groups were evaluated respectively, and a questionnaire survey was conducted on the students (including whether the teaching is conducive to stimulating the interest and enthusiasm of learning, whether it is conducive to the establishment of clinical thinking, evaluation of advantages and disadvantages of the teaching method, and whether the teaching method is conducive to the mastery of theoretical knowledge). SPSS 20.0 was used for analysis of variance, t test, and Chi-square test. Results:The theoretical score of group A (85.83±4.62) was the lowest, and the theoretical score of group B was significantly lower than that of group C (89.71±5.84 vs. 94.60±6.28); the answer time of group C (286.68±77.56 seconds) was the shortest, and the answer time of group B was significantly shorter than that of group A (359.78±80.55 vs. 423.31±83.53 seconds, P<0.001). Group C was significantly better than group B and group A in the aspects of stimulating interest and enthusiasm in teaching, conducive to the establishment of clinical thinking, advantages of the teaching method, and conducive to the mastery of theoretical knowledge, and group B was significantly better than group A ( P<0.001). Conclusion:The combination of CBL and 3D reconstruction technology improves the recognition of thoracic surgery interns to the teaching method, increases their theoretical scores, stimulates their learning interest and enthusiasm, cultivates their clinical thinking, and enhances their mastery of theoretical knowledge.
ABSTRACT
@#Three-dimensional (3D) visualization technology can well characterize lung nodules, accurately locate lung nodules, accurately identify lung anatomical structures, shorten operation time, reduce intraoperative and postoperative complications, and make thoracoscopic precise lung resection safer and more efficient. However, the mastery of 3D reconstruction technology in some hospitals still needs to be improved. Due to the time and economic cost of 3D printing, the development of this technology is restricted. With the application and improvement of 3D visualization technology in more centers in the future, the development of precise lung resection will be more extensive. This article reviewed the progress on 3D visualization technology in thoracoscopic precise lung resection.
ABSTRACT
The incidence and mortality of lung cancer rank first among all malignant tumors in China. With the popularization of high resolution computed tomography (CT) in clinic, chest CT has become an important means of clinical screening for early lung cancer and reducing the mortality of lung cancer. Imaging findings of early lung adenocarcinoma often show partial solid nodules with ground glass components. With the development of imaging, the relationship between the imaging features of some solid nodules and their prognosis has attracted more and more attention. At the same time, with the development of 3D-reconstruction technology, clinicians can improve the accuracy of diagnosis and treatment of such nodules.This article focuses on the traditional imaging analysis of partial solid nodules and the imaging analysis based on 3D reconstruction, and systematically expounds the advantages and disadvantages of both. .
Subject(s)
Humans , Adenocarcinoma of Lung/pathology , Image Processing, Computer-Assisted , Lung Neoplasms/pathology , Solitary Pulmonary Nodule/pathology , Tomography, X-Ray ComputedABSTRACT
Objective:To investigate the clinical value of improved perforator area CTA three-dimensional reconstruction in design and harvest of anterolateral thigh perforator flap(ALTPF) and deep inferior epigastric artery perforator flap(DIEPF).Methods:Repairs of defects of oral and maxillofacial tumour resection with ALTPF for 8 patients and defects of breast tumour resection with DIEPF for 2 patients were performed from September 2021 to January 2022 in the Department of Hand and Microsurgery of Affiliated Hospital of Binzhou Medical College. According to the improved scanning parameters and drug administration protocol, patients underwent CTA scans of both thighs or abbomen before operation. The data of CTA were sent to GE AW 4.7 work station to produce three-dimensional reconstruction of perforator area and angiosome. The source artery and perforator were observed dynamically from the angiosome in the perforator area, and the specific data were measured. The perforator location was marked by HHD, and then according to the measurement data of CTA three-dimensional reconstruction marked the location, course of perforator and the course of source artery on the body surface. The data of source arteries and perforators explored during the operation were compared with preoperative three-dimensional reconstruction. The perforator locations of CTA were compared with the HHD. The harvest time and survival condition of flap were compared with the previous patients who only had the perforator location markers from HHD. The sizes of ALTPFs and DIEPFs were 4.0 cm×4.0 cm-15.0 cm×6.0 cm and 19.0 cm×7.5 cm-25.0 cm×10.0 cm, respectively. The survival of flaps and the healing of wound were observed in the postoperative follow-up in terms of appearance, texture, function of recipient site and the shape and function of the donor site.Results:Eight ALTPFs and 2 DIEPFs all survived without any adverse event. Both recipient and donor sites healed well without any complication. Seven femoral septocutaneous perforators, 2 musculocutaneous perforators and abdominal 3 perforators coursed directly, 2 tortuously perforators were seen from three-dimensional reconstruction. The types and origins of perforators explored during operation were basically consistent with three-dimensional reconstruction. The accuracy of CTA[(0.36±0.11) cm] was higher than HHD[(0.54±0.19) cm] for perforators location( t=-3.160, P<0.05). Compared with the previous group[(74.60±30.53) min], this group[(52.80±24.57) min] had a shorter time to cut out the flap of similar area( t=-9.179, P<0.05). In the previous group, one flap transfer was failed due to the thinner caliber of perforator and source artery. All the flaps survived with satisfactory outline and softness with good blood supply after 2-6 months of follow-up. The oral and maxillofacial functions were normal. The reconstructed breasts were symmetrical with the healthy side, and the shape was satisfactory. Only linear scars remained in the donor sites without dysfunction. Conclusion:The improved CTA three-dimensional reconstruction of perforator area can help to determine the detailed location, course and distribution of the perforators at the superficial fascia layer. It provides a reliable bases in the design and harvest of perforator flaps during operation, reduces the perioperative risks and has certain clinical values.
ABSTRACT
Objective:To investigate the typing and clinical value of posterior group renal calyces.Methods:From April 2020 to June 2021, 640 patients (320 men and 320 women) who underwent CTU examination in our hospital with kidneys on both sides and normal or only mild hydronephrosis in the collecting system were analyzed. A total of 1 280 renal CTU three-dimensional reconstructed images were counted.The patients aged 52.4±11.9 years. The patients' CTU images were reconstructed in three dimensions using the spine as a marker to rotate the collecting system images in stereoscopic space to simulate a prone position. A two-person review was taken to observe the imaging morphology of the renal calyces in the prone position, and the 640 renal calyces in the posterior group of the left and right sides were counted for staging. Based on the morphology of the renal calyces and the influence on the establishment of surgical access, the posterior group of renal calyces was divided into 3 major types. Pot-belly type: the renal pelvis is shaped like a pot-belly, and the renal pelvis is directly connected to the cup-shaped minor calyces without a distinct major renal calyces. Classically branched: 2 or more major renal calyces are branched and converge to form the renal pelvis. Elongated branched: the major calyces are branched, with at least one major calyces having an axis length ≥0.9cm and a neck width ≤0.3cm.The classic branching type is divided into three types, a, b, and c, including seven subtypes, based on the relationship of the posterior group of the minor calyces to the major calyces. Type a is derived from group 1 major calyces only, type b is derived from group 2 major calyces at the same time, and type c is derived from the upper, middle and lower groups of major calyces at the same time. Type a contains 3 subtypes.Type a1 is derived from the upper group of major calyces only, type a2 is derived from the middle group of major calyces only, and type a3 is derived from the lower group of major calyces only. Type b is also divided into 3 subtypes. Type b1 is derived from the upper and middle groups of major calyces at the same time, type b2 is derived from the middle and lower groups of major calyces at the same time, and type b3 for the upper and lower renal major calyces. Type c had no corresponding subtype.Results:Statistical findings revealed that all kidneys had posterior group calyces. The morphological typing of the posterior group of calyces was 8.83% (113/1 280) for the pot-bellied type, which had the highest occurrence of 2 minor calyces (5.63%, 72/1 280). 71.25% (912/1 280) had the classically branched type, which had the highest occurrence of 3 minor calyces (31.17%, 399/1 280). 19.92% (255/1 280) had the elongated branched type, with the highest percentage of 3 occurring in the calyces (9.92%, 127/1 280). The anatomical typing of the classical branching type occurred in 20.50% (187/912) for type a, 66.45% (606/912) for type b, and 13.05% (119 /912) for type c. The percentage of occurrence of type a1/a2/a3 was 4.06% (37/ 912), 6.14% (56/ 912), and 10.31% (94/912). b1/b2/b3 types occurred in 2.03% (21/912), 7.46% (68/912), and 56.69% (517/912), respectively.Conclusions:The posterior group of calyces is structurally complex and extremely variable. In this study, the posterior group calyces were found to be present in all patients, and the posterior group calyces were morphologically divided into 3 types, with the highest percentage of occurrence of the classical branching type and the highest percentage of 3 posterior group minor calyces. The classical branching anatomical typing was highest in type b with the highest percentage of type b3, which combined with stone distribution, made it easy to choose the puncture location. The typing of the posterior group of calyces can provide an anatomical basis for PCNL puncture from the posterior group.
ABSTRACT
Objective:To study the use of three-dimensional reconstruction in preoperative evaluation of complicated hepatic echinococcosis in Tibet.Methods:Sixty patients with complex hepatic hydatidosis admitted to the People's Hospital of Tibet Autonomous Region from April 2020 to August 2020 and planned to undergo radical hepatectomy were enrolled in this prospective randomized controlled study. The patients were randomly divided into the preoperative CT group and preoperative 3D reconstruction group by computer generated random numbers, with 30 patients in each group. Those with odd random numbers were enrolled in the preoperative CT group, and those with even random numbers were enrolled in the preoperative 3D reconstruction group. According to the imaging results, the operation plan was developed, and the coincidence rates of the preoperation plan with intraoperative decision, and postoperative complications were compared between the two groups.Results:There were 27 males and 33 females, aged (40.7±12.7) years. In the preoperative CT group, 53.3% (16/30) of the operation carried out were consistent with the preoperative planned operations. The corresponding figure for the preoperative 3D reconstruction group was 86.7% (26/30). The difference between the two groups was significant ( P<0.05). In the preoperative CT group, the operative time was (220.0±32.3) min, the intraoperative blood loss was (523.0±47.1) ml, the number of patients requiring hepatic blood inflow occlusion was 25 (83.3%), and the time of hepatic blood inflow occlusion was (32.1±5.8) min. In the preoperative 3D reconstruction group, the operative time was (156.0±17.6) min, the intraoperative blood loss was (212.0±21.5) ml, the number of patients requiring of hepatic blood inflow occlusion was 15 (50.0%), and the time of hepatic blood inflow occlusion was (16.2±3.4) min. The differences between the two groups were also significant (all P<0.05). Conclusion:Preoperative three-dimensional reconstruction of complex hepatic echinococcosis in Tibet effectively improved the safety of surgery.
ABSTRACT
Objective:To analyze curative efficacy and pronosis of three-dimensional reconstruction combined with 3D printing assisted minimally invasive surgery in the treatment of hepatolithiasis.Methods:92 patients with complex hepatolithiasis treated by minimally invasive surgery in Qingdao Hospital affiliated to Shandong First Medical University from November 2018 to January 2020 were retrospectively selected. According to different surgical positioning methods, they were divided into the control group [50 cases , conventional computer tomography (CT) positioning] and the observation group (42 cases, 3D reconstruction combined with 3D printing technology). The curative effect, stone residue rate, operation related indexes, complications and recurrence rate were compared between the two groups.Results:The excellent and good rate of the observation group was higher than that of the control group (95.2% vs 80.0%), and the rate of residual stones after surgery was lower than that of the control group (4.0% vs 22.0%), with statistically significant difference (both P<0.05). Compared with the control group, the observation group had shorter operation time, less intraoperative blood loss and postoperative abdominal drainage volume, shorter postoperative abdominal drainage time and hospital stay, with statistically significant difference (all P<0.05). The incidence of postoperative complications and recurrence rate in the observation group were lower than those in the control group (11.9% vs 30.0%, 2.4% vs 18.0%), with statistically significant difference (both P<0.05). Conclusions:Three-dimensional reconstruction combined with 3D printing assisted minimally invasive surgery is effective in the treatment of complex hepatolithiasis and can reduce the recurrence rate.
ABSTRACT
BACKGROUND: The implantation of titanium alloy prosthesis would produce stress shielding to damage mechanical microenvironment of bone tissue. This might affect normal bone remodeling process. Interference fit was used to generate preload to reconstruct mechanical microenvironment in this area. It may have important theoretical significance and clinical application value to promote bone remodeling in the mid-long-term after surgery. OBJECTIVE: To analyze the promoting effect of preload on osseointegration of porous titanium alloy prosthesis. METHODS: Fourteen male New Zealand rabbits were divided into two groups. The three-dimensional (3D) printed titanium alloy prosthesis was implanted into the outside of right femoral condyle with interference fit in experimental group (n=7). Rabbits in the control group (n=7) were feed free. Femurs at the surgery side were extracted at 12 weeks after surgery. Micro-CT scanning and 3D reconstruction were performed to measure bone density and trabecular morphological parameters around the prosthesis. Animal experiment was approved by Animal Ethics Committee of Tianjin Institute of Medical Science (approval No. IMPS-EAEP-Z-2019108-01). RESULTS AND CONCLUSION: (1) Bone mineral density was reduced significantly in the experimental group compared with the control group (P 0.05). (3) The results showed that preload could promote osseointegration of porous titanium alloy prosthesis. However, the structural characteristics of the in-growth bone were worse than healthy bone. This might lead to a high fracture risk in the mid-long-term after surgery.
ABSTRACT
Objective:To investigate the application value of pancreatoduodenectomy (PD) with preservation of the gastric tube.Methods:The retrospective and descriptive study was conducted. The clinicopathological date of 3 male patients who underwent PD with preservation of the gastric tube for the treatment of periampullary tumor in Nanjing Drum Tower Hospital affiliated to Nanjing University Medical School from May 2018 to November 2019 were collected. The 3 patients were aged from 66 to 77 years, with a median age of 76 years. All 3 patients with surgical history of radical resection of esophageal tumors and tubular gastric surgery underwent PD with preservation of the gastric tube. Observation indications: (1) preoperative three-dimensional (3D) reconstruction; (2) surgical and postoperative situations; (3) follow-up. Follow-up using outpatient exa-mination or telephone interview was conducted to detect survival of patients and tumor metastasis and recurrence up to April 2021. Measurement date with skewed distribution were expressed as M(range).Count date were expressed as absolute numbers. Results:(1) Preoperative 3D recons-truction: results of preoperative 3D reconstruction for the 3 patients showed none of patients with vascular variation. (2) Surgical and postoperative situations: 3 patients underwent PD with preserva-tion of the gastric tube successfully. The operation time and the volume of intraoperative blood loss were 402 minutes(range, 345?480 minutes) and 330 mL(range, 300?400 mL) for the 3 patients. Of 3 patients, 1 case had postoperative grade B pancreatic fistula and 1 case had chylous leakage, respectively, who were improved after conservative treatment. There was no perioperative death. The duration of postoperative hospital stay was 18 days(range, 15?20 days) for the 3 patients. Results of postoperative histopathological examination for the 3 patients showed that 1 case with pancreatic cancer as T2N0M0 stage, 1 case with ampulla carcinoma as T2N0M0 stage and 1 case with intraductal papillary mucinous neoplasms of the pancreas. (3) Follow-up: 3 patients were followed up for 12 to 18 months, with a median follow-up time of 16 months. Results of abdominal enhanced computed tomography examination at postoperative 14 month for the 3 patients showed that the right gastroepiploic artery and vein around the pancreas were unobstructed. Of 3 patients, 1 case with pancreatic cancer who did not receive chemotherapy died at postoperative 14 months due to tumor recurrence and metastasis. There was no recurrence and metastasis in the other two cases.Conclusion:PD with preservation of the gastric tube is safe and feasible, which can be used for patients with periampullary lesions who underwent radical resection of esophageal tumors and tubular gastric surgery in the past.
ABSTRACT
BACKGROUND@#The good prognosis of lepidic predominant invasive adenocarcinoma (LPA) and adenocarcinoma in situ (AIS)/microinvasive adenocarcinoma (MIA) in the pathological subtypes of early lung adenocarcinoma is similar, and the means to distinguish LPA from non-LPA is urgently needed in clinical practice. This study intends to analyze the correlation between positron emission computed tomography (PET)/computed tomography (CT) maximal standard uptake value (SUVmax) with CT three-dimensional reconstruction parameters and the pathological subtypes of early lung adenocarcinoma with part-solid nodules (PSNs) in preoperative imaging.@*METHODS@#The data of early lung adenocarcinoma patients who underwent anatomical pneumonectomy at the Department of Thoracic Surgery of Northern Jiangsu People's Hospital from January 2016 to January 2019 retrospectively analyzed and subsolid nodules on imaging were showed. All patients with enhanced chest CT and PET/CT data can be obtained completely, using Mimics software to perform three-dimensional reconstruction to obtain tumor volume, 3-dimensional mean-CT value (3Dm-CT) of tumor and SUVmax, using SPSS 25.0 for statistical analysis and GraphPad Prism 8.3.0 for drawing receiver operating curve (ROC). P0.7 were included in the multivariate ROC curve analysis, and the joint predictor (AUC=0.835) was obtained with medium or above predictive value.@*CONCLUSIONS@#PET/CT SUVmax and CT three-dimensional reconstruction parameters have a significant correlation with the different pathological subtypes of early lung adenocarcinoma with PSNs in imaging. The combination of SUVmax, tumor volume, ground glass component volume and 3Dm-CT of solid/ground glass component CT value has certain value in identifying the pathological subtype of early stage lung adenocarcinoma with PSNs nodules in imaging.
ABSTRACT
OBJECTIVE@#To study the three-approach and traditional anterior medial technique to establish the femoral tunnel of position, length, and coronal angle and the early efficacy of anterior cruciate ligament reconstruction.@*METHODS@#Through retrospective research, from December 2018 to June 2019, a total of 36 patients diagnosed with simple anterior cruciate ligament tear and undergoing surgery were collected. All patients had a clear history of knee sprains and were divided into two groups. A group of 16 patients, including 11 males and 5 females, with an average age of (30.13±6.54) years and an injury time of 7 to 60 (30.19±15.78) days, three-approach technique was used to drill the femoral tunnel to reconstruct the anterior cruciate ligament. Another group of 20patients, including 15 males and 5 females, with an average age of (30.80±8.60) years, and an injury time of 7 to 60 (27.35±15.50) days, the traditional anterior medial approach was used to drill the femoral tunnel to reconstruct anterior cruciate ligament. CT 3D reconstruction technique was used to evaluate the femoral tunnel and the knee joint function was evaluated by Lysholm score of the knee joint.@*RESULTS@#All patients achieved primary healing after the surgical incision. No femoral tunnel fracture, vascular and nerve damage, difficulty in graft passage during the operation, and venous thrombosis occurred. All 36 patients were followed up on an outpatient basis, with a follow up period of 9 to 15 (12.00±2.83) months. Three-dimensional CT reconstruction was used to evaluate the femoral tunnel of the patients. The position of the femoral tunnel was described using the quartile method as the three-approach group:the lower (27.83±1.97) % of the femoral condyle and the posterior (25.57±3.20) %;the traditional approach group:the lower (28.38±3.21) % of the femoral condyle and the posterior (26.23±3.20) %. Bone tunnel length, three-approach group:(35.20±5.52) mm in total length, (23.20±2.07) mm in thick bone tunnel;traditional approach group:(34.60±4.26) mm in total length, (22.56±2.50) mm in thick bone tunnel. Coronal plane angle, three-approach group:(47.93±5.98) °;traditional approach group:(41.78±6.62) °. Knee joint Lysholm score, three-approach group:48.67±4.18 before surgery;97.00±2.48 at last follow up;traditional approach group:49.75±5.33 before surgery, 97.30±2.68 at last follow up, there were significant differences before and after surgery, no significant statistical difference between two groups.@*CONCLUSION@#The positions of the femoral tunnel drilled by the two methods were within the range of the anatomic stop of the anterior cruciate ligament, and there was no statistical difference. Compared with the traditional anterior medial approach, the coronal plane angle of the femoral tunnel drilled by the three-approach approach is relatively large, and there were no statistical differences in the length of the tunnel, the early postoperative effect of the two surgical methods, and the operation time. But the three approach has a wider and clearer vision. In addition, the knee flexion angle required for drilling the femoral tunnel during surgery is significantly smaller than that of traditional approach technology, which reduces the difficulty of surgery.